Referencer
Dormer:E621M3
Rubix:6197849
EAN:7320760384916
Teknisk oversigt
| Gevindskæring | m3 x 0,50 (egm3) |
|---|---|
| Gevinddiameter | 3.2 mm |
| Type | metriske blinde huller |
oplysninger om produktet : TAP M3x0.50mm HSS - E621M3 - DORMER
HSS machine tap for metric Helicoil thread uncoated form C 40° spiral fluted 2xD blind holes for general use in steel <1200 N/mm². Stainless steel. Nickel alloys <900 N/mm² and aluminium alloys.
Applikationer
• Structural steel, case-hardening steel (<200 HB <700 N/mm²)
• Carbon steel (<250 HB <850 N/mm²)
• Alloy steel (<250 HB <850 N/mm²)
• Alloy steel hardened and tempered (>250<350 HB >850<1200 N/mm²)
• Stainless free-cutting steel (<250 HB <850 N/mm²)
• Stainless steel - austenitic (<320 HB <1100 N/mm²)
• Stainless steel - ferritic + austenitic + martensitic (<300 HB <1000 N/mm²)
• Nickel alloys (<270 HB >900 N/mm²)
• Aluminium, magnesium unalloyed (<100 HB <350 N/mm²)
• Aluminium alloys - Silicon 0.5% (<150 HB <500 N/mm²)
• Aluminium alloys - Silicon >0.5% <10% (<120 HB <400 N/mm²)
• Aluminium alloys - Silicon >10% whisker-reinforced aluminium alloys, magnesium alloys (<120 HB <400 N/mm²)
• Carbon steel (<250 HB <850 N/mm²)
• Alloy steel (<250 HB <850 N/mm²)
• Alloy steel hardened and tempered (>250<350 HB >850<1200 N/mm²)
• Stainless free-cutting steel (<250 HB <850 N/mm²)
• Stainless steel - austenitic (<320 HB <1100 N/mm²)
• Stainless steel - ferritic + austenitic + martensitic (<300 HB <1000 N/mm²)
• Nickel alloys (<270 HB >900 N/mm²)
• Aluminium, magnesium unalloyed (<100 HB <350 N/mm²)
• Aluminium alloys - Silicon 0.5% (<150 HB <500 N/mm²)
• Aluminium alloys - Silicon >0.5% <10% (<120 HB <400 N/mm²)
• Aluminium alloys - Silicon >10% whisker-reinforced aluminium alloys, magnesium alloys (<120 HB <400 N/mm²)
Tekniske informationer
Egenskaber
| Gevindskæring | m3 x 0,50 (egm3) |
|---|---|
| Gevinddiameter | 3.2 mm |
| Type | metriske blinde huller |
| Med kølespray | ingen |
| Gevindretning | højre |
| Borediameter | 3 mm |
| Endediameter | 3.15 mm |
| Firkantet trækadapter | 4 mm |
| Gevinddybde | 14 mm |
| Vinkel for helix | 40 ° |
| Maling | bright |
| Længde i alt | 53 mm |
| Kropsmateriale | hss |
| Gevind | egm3 (m3 x 0,50) |
| Antal gevind per tomme | 50.8 |
| Tolerance | 6h |
| Skafttype | square drive (square drive) |
At vise UNSPSC/ECL@SS
356,91 kr. Ex moms
/ Styk
446,14 kr. Inkl moms
- Tilgængelig - Leveringsdato på forespørgsel