Konise rullelejer FAG 33015, Udvendig diameter: 115 mm | Indvendig diameter: 75 mm | Bredde: 25.5 mm
Tapered roller bearing
Se tekniske oplysningerReferencer
FAG:33015
Rubix:162057
producent:0167133540000
EAN:4012801047449
oplysninger om produktet : 33015 FAG
Tapered roller bearings 330, main dimensions to DIN ISO 355 / DIN 720, separable, adjusted or in pairs
Styrker
•High radial loads occur
High axial loads act on one side
Combined loads must be supported (radial and axial forces acting simultaneously)
Precise axial guidance of the shaft is required (locating bearing function)
The bearing arrangement must have very high axial rigidity
The bearing position is operated clearance-free or under preload (single bearings are adjusted against each other)
High running accuracy is required
The load carrying capacity of angular contact ball bearings is no longer sufficient and the higher speed suitability of angular contact ball bearings is not required
The bearings are not required to compensate misalignments
The design objective comprises compact, rigid and economical bearing arrangements with a high load carrying capacity
High axial loads act on one side
Combined loads must be supported (radial and axial forces acting simultaneously)
Precise axial guidance of the shaft is required (locating bearing function)
The bearing arrangement must have very high axial rigidity
The bearing position is operated clearance-free or under preload (single bearings are adjusted against each other)
High running accuracy is required
The load carrying capacity of angular contact ball bearings is no longer sufficient and the higher speed suitability of angular contact ball bearings is not required
The bearings are not required to compensate misalignments
The design objective comprises compact, rigid and economical bearing arrangements with a high load carrying capacity
Tekniske informationer
Egenskaber
| Dimensioner (D x B x H) | 32,2x115x115 mm |
|---|---|
| Logistik, vægt | 1160 g |
| Indvendig diameter | 75 mm |
| Udvendig diameter | 115 mm |
| Bredde | 25.5 mm |
| Type lejeafstand | cn |
| Serie | 330 |
| Materiale | steel |
| Referencehastighed | 3700 rpm |
| Grænsehastighed | 5900 rpm |
| Lejebredde i alt | 31 mm |
| Grundlæggende statisk belastning, radial - C0r | 232000 N |
| Grundlæggende dynamisk belastning, radial - Cr | 139000 N |
At vise UNSPSC/ECL@SS
1.690,88 kr. Ex moms
/ Styk
2.113,60 kr. Inkl moms
- Tilgængelig - Leveringsdato på forespørgsel